3DLABS Oxygen 402 - Manual (Page 2)

Copyright 1996, 1997, 1998 by Dynamic Pictures, Inc. All rights reserved.
Dynamic Pictures and the Dynamic Pictures logo are registered trademarks, and Oxygen and
PowerThreads are trademarks of Dynamic Pictures, Inc. Pentium is a registered trademark and PCI
is a trademark of Intel. Alpha is a trademark of Digital Equipment Corporation. OpenGL is a
registered trademark of Silicon Graphics. Softimage and Softimage|3D are registered trademarks of
Softimage, Inc., a wholly owned subsidiary of Microsoft Corporation. Microsoft, Windows, Windows
NT, and/or other Microsoft products referenced herein are either trademarks or registered
trademarks of Microsoft. CrystalEyes is a trademark of StereoGraphics. SolidWorks is a trademark of
SolidWorks, Inc. Heidi and 3D Studio MAX are trademarks of Autodesk. LightWave is a trademark
of NewTek. Pro/ENGINEER is a registered trademark of Parametric Technology Corporation.
Unigraphics is a registered trademark of Electronic Data Systems. SDRC is a registered trademark
and I-DEAS is a trademark of Structural Dynamics Research Corporation. Lightscape and the
Lightscape Visualization System are trademarks of Lightscape Technologies, Inc. MicroStation and
the MicroStation Stylized “M” logo are registered trademarks and Bentley and the “B” Bentley logo
are trademarks of Bentley Systems, Incorporated. All other trademarks and registered trademarks
are the property of their respective holders. Portions of the product described in this
documentation incorporate technology licensed from Digital Equipment Corporation. The software
described in this document is furnished under a license and may be used or copied only in
accordance with the terms of such license.
Caution: Changes or modifications to the Oxygen 3D graphics accelerator card not expressly
approved by Dynamic Pictures, Inc. void the user’s warranty.
FCC NOTICE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy. If product is not installed and used in accordance with
the instruction manual, it may cause harmful interference to radio communications; however, there
is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
1) Re-orient or relocate the receiving antenna;
2) increase the separation between the equipment and receiver;
3) connect the equipment into an outlet on a circuit different from that to which the
receiver is connected; or
4) consult Dynamic Pictures or an experienced radio/TV technician for assistance.
Compliance with FCC rules requires that a shielded cable be used to connect to other equipment.
This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This Class B digital apparatus meets all the requirements of the Canadian Interference-Causing
Equipment Regulations. Cet appareil numérique de la classe B respecte toutes les exigences du
Règlement sur le matérial brouilleur du Canada.
Dynamic Pictures, Inc. makes no representation that the use of its products in the manner described
in this publication will not infringe on existing or future patent rights, nor do descriptions contained
n this publication imply the granting of licenses to make, use, or sell equipment or software in
accordance with the description.
There are no warranties implied by this owner’s guide. Any warranties granted by Dynamic Pictures,
Inc. with respect to the product described in this owner’s guide were granted through a separate
OEM or reseller agreement. No responsibility is assumed for the use or reliability of software on
equipment that is not supplied by Dynamic Pictures, Inc. or its affiliated companies.