3xLOGIC VIGIL Server - Manual (Page 16)

3.5 Alarms and Relays
Depending on the hardware installed with your VIGIL Server unit, you may have access to alarm inputs or relay out-
puts. The number of available alarms and relays is dependent on your hardware.
Alarm inputs can trigger recording of video and/or audio based on an externally tripped circuit. Relay outputs can be
triggered by motion alarms, video loss, POS data, or failure of the VIGIL Server.
Opens the LiveAlarms or Relayswindow.
The Live Alarms window indicates configured alarm inputs.
Green : Alarm input is enabled.
Red : Alarm input is triggered.
The Relays window indicates configured relay outputs and allows manual control of relays.
Green : Relay output is enabled.
Red : Relay output has been triggered by VIGIL Server.
You can manually turn on/off some relays by clicking on their respective button.
In the example image, the 6th relay has been set to stay closed while the application is open and can-
not be turned off manually.
3xLOGIC's VIGIL Server 7.1 User Guide
Pg. 12