3xLOGIC VIGIL Server - Manual (Page 70)

VIGIL Server Network Camera Type
Another VIGIL Server can be connected in the same way you would connect to a network camera. This will display any
camera that the VIGIL Server receives and allows you to relay analog video from one recording VIGIL Server to
another.
To set up this configuration, select the VIGIL Server type in the Network Camera window. The recommended settings
for this setup are:
Address IP Address of the VIGIL Server.
Port Live Video Port, default 22802.
Camera Number The camera input number on the remote VIGIL Server to be used.
User/Password The username and password used to log into the remote VIGIL Server, if applicable.
ONVIF and PSIA Network Camera Types
ONVIF and PSIA are interoperability standards for IP based Network Cameras. As long as a camera supports either of
these standards, it can be configured with this standard instead of the brand specific standard. ONVIF is the pre-
dominate standard currently being utilized by manufacturers. When configuring an ONVIF supported camera through
network cameraesb settings, the ONVIF device manager is opened.
3xLOGIC's VIGIL Server 7.1 User Guide
Pg. 66