Accutone BT703 - Manual (Page 3)

Preparations
You need to charge your BT703 before using. There are two ways to charge
your headset, (1) via USB cable and (2) via AC/DC Power Adaptor. The USB
cable is included and the Power Adaptor is optional.
Charging Via USB Cable
Connect your headset as illustrated above, with the small round plug
going into the headset, and the USB plug going into any USB port of your
desktop or notebook computer. .
Charging Via AC/DC Power Adaptor
Similarly, connect your BT703 headset to the small round plug of the
adaptor and the other end to any wall-jack. Depending on your region, the
Voltage and the adaptor pins will be different.
The LED indicator will light up RED during charging, and BLUE when it’s
fully charged. It generally takes up to 2 hours for a full charger, but user
should charge the headset for 4 hours during the first charge.
Operations
B
Charging the Headset
to computer USB port
RED LED during
Charging
Do not attempt to charge the headset with any adaptor other than the
one provided, as unauthorized adaptors can severly damage the
headset.
C
Turning the Headset On/Off
Answer Button
Turn ON the headset by pressing and
holding the Answer Button for 4 seconds.
LED Indicator will flash BLUE rapidly 3
times. This indicate the headset is now on.
Turn OFF the headset by pressing and
holding the Answer Button for 3 seconds.
LED Indicator will flash RED rapidly 5
times. This indicate the headset is now off.
Low Battery Indication
If the headset continuously flashes RED when it’s turned on, the headset
is low on battery, please charge the headset as soon as possible.
D
Pairing the Headset
Answer Button
With the headset turned OFF, press and
hold the Answer Button until the LED
Indicator alternately flashes BLUE & RED.
Set your Bluetooth-enable mobile phone
to Discovery Mode. Wait for the phone to
search for "BT703" headset.
Confirm pairing, and you phone will ask you for a PASSKEY, enter the
default PIN code of "
(4 zeros) and confirm OK. 0000"