Accutone BT703 - Manual (Page 5)

Operations
Your mobile phone must support Voice Dialing for this feature to apply.
Shortly press the Answer Button on the Headset, you will hear the voice-
activation tone through the Headset, say the name of the person you wish
to call. When you have finished the call, if you wish to deactivate Voice-
Dialing, simply short press the Answer Button again.
For mobile phones which do not have Voice-Dialing, or the Voice-Dialing
feature deactivated from your phone, short pressing the Answer Button
will initiate redial.
If the Headset is paired to more than one phone, the last number dialed
from the latest-used phone will be re-dialed.
When a call comes in, press the Answer Button on the Headset to answer. If
you have already answer the call using the mobile phone instead, while
you are still on the call, press and hold the Answer Button for 2 seconds to
transfer the call from the phone to the Headset.
When you are finished with a call, press the Answer Button again to end it.
Operations
K
Rejecting and Transferring a Call
G
Voice Dialing
Users can reject an incoming call using the Headset alone. Simple press
and hold the Answer Button for 2 seconds while the phone is ringing.
During a call, if you wish to transfer the call to the mobile phone or vice-
versa, simply press and hold the Answer Button for 2 seconds, until you
hear a switching tone*.
*In some mobile phone models, users can only transfer a call via the mobile phone menu.
L
Adjusting the Call Volume & Muting
Before or during a call, you can adjust the speaker volume of the
Headset by pressing one the respective volume control button.
To mute the microphone, simply press the Volume Increase and Volume
Decrease Buttons at the same time until you hear a tone. During muting,
you will hear a beep-tone every 3 seconds so you know the call is on
mute.
To un-mute, repeat pressing both buttons until a tone is heard.
H
Last Number Redial
I
Answer & End Calls
Volume
Decrease Volume
Increase