Acrosser AR-B6051 - Manual (Page 14)

26. LPC1 (LPC BUS Signal Header for Port-80
Debug Tools)
27. SATA1 (SATA device connector #1)
Pin SIGNAL
1 33MHz Clock
2 LAD1
3 Reset#
4 LAD0
5 LFRAME#
6 VCC3
7 LAD3
8 GND
9 LAD2
10 GND
To connect SATA device:
1. Attach either end of the signal cable to
the SATA connector on motherboard.
Attach the other end to the SATA device.
2. Attach the SATA power cable to the
SATA device and connect the other end
from the power supply.
28. MINIPCIE1 ( Mini PCIe Socket ) 29. CF1 (CF CARD Socket)
14