Acrosser AR-B6051 - Manual (Page 40)

Note: Installing Windows XP in the AHCI mode
Please follow the steps listed below to install the Windows XP operation system in the AHCI mode.
 Prepare a USB floppy drive and a floppy disk. Copy all the files in the folder
“WinXP32_AHCI_Driver” to the floppy disk.
 Connect the floppy drive to the system before installing the Windows XP operating system. Make
sure the floppy disk is inserted.
 Boot the system with the installation CD. Follow the instructions on the screen. As soon as the
screen shows this information, press ‘F6’.
40