Acrosser AR-B5630 - Manual (Page 11)

Revision: 2.01
11
2.1.3 List of Connector and Jumper Setting
PWR2
External +12V DC power input
connector.
KM1
Keyboard/Mouse Connnector.
COM1 *
External RS232 signal connector
for port #1.
CON2
ATX function connector.
USB2
Internal USB2, USB3 connector.
JP1
Select COM2 RS232/422/485.
CON3
Extra +12V and +5V DC power
output connector (for SATA
device). USB1
External USB0, USB1 connector.
COM2 *
RS-232/422/485 signal connector
for port #2.
J10
PCI-104 connector.
LAN2
RJ45 connector for Gigabit
Ethernet port #2.
GPIO1
8-bit TTL-5V GPIO connector.
JP2
Signal SERIRQ connects to
PCI-104 pin #B2 selection.
LAN1
RJ45 connector for Gigabit
Ethernet port #1.
AUDIO1
5.1 channels Audio signal
connector.
J5
CMOS data retention/clear.
LCD1
LCD panel (LVDS, 18-bit/36-bit)
connector.
FAN2
System DC fan connector.
BAT1
CMOS battery holder.
LCDPW1
LCD panel inverter power
connector.
FAN1
CPU DC fan connector.
SATA1
SATA device connector #1.
VGA1
Pin Header for D-Sub 15 Pin
VGA.
J1
LCD panel driving voltage
selection.
J8
CF master or slave select.
DVI1
Digital Video Interface (DVI-D).
TVCON1
TV-out signal connector.
IDE1
PATA connector(UATA-100).
J9
RS422/RS485 signal connector
(for COM2).
SODIMM1
DDR2 SO-DIMM Slot.
J12
Front panel connector. (NOTE 1)
COM3 *
RS232 signal connector for port
#3.
CF1
CF card socket.
D20
System standby power and HDD
access indicators.
COM4 *
RS232 signal connector for port
#4.