Acrosser AR-B8170 - Manual (Page 15)

AR-B8170 User Manual
15
3.1 Main Setup
3.1.1 AMI BIOS
This is the interface of AMI BIOS:
3.1.2 Processor
This part shows the auto-detected CPU specification. DM&P Semiconductor is the
Vortex86SX 32-Bit Microprocessor, DDR2 128MB onboard, which is based on x86 structure. It is
the x86 SoC (System on Chip) with 0.13 micron process and ultra low power consumption design
(less than 1 watt)The CPU on the Vortex86SX is a high performance and fully static 32-bit X86
processor with the compatibility of Windows based, Linux and most popular 32-bit RTOS.
3.1.3 System Memory
This part shows the auto-detected system memory. The Vortex86DX is a high performance
with 256MB RAM and speed 133MHz onboard and fully static 32-bit x86 processor, which is
compatible with DOS and Linux. It integrates 32KB write through direct map L1 cache, PCI Rev.
2.1 32-bit bus interface at 33 MHz, SDRAM, DDR2, ROM controller, IPC (Internal Peripheral
Controllers with DMA and interrupt timer/counter included), Fast Ethernet MAC, FIFO UART,
USB2.0 Host and IDE controller into a System-on-Chip (SoC) design. The Vortex86DX are all
256MB onboard and the speed is 133MHz.
3.1.4 System Time:
The time format is based on the 24-hour military time clock. Press the “+” or “–“ key to
increment the setting or type the desired value into the field.
3.1.5 System Date:
Press the “+” or ” –“ to set the date you wanted. The BIOS determines the day of the week
from the other date information; this field is for information only.