Acrosser AR-B8170 - Manual (Page 6)

AR-B8170 User Manual
6
1.1Specifications
AR-B8170, ISA bus CPU card with DM&P CPU Vortex86DX.
On-board fanless DM&P Vortex86DX 800MHz / L1 32KB, L2: 256KB included in CPU.
AMI BIOS Core-8 / On chip SPI Flash 2MBits built-in.
Default On-board DDR2 256MB (128Mb*8*2) support DDR2 clock up to 333MHz.
Interfaces with 4 through holes, follow AR-B1479A.
Support AR-B1047 for 1 device at a time (not support 2 device at the same time).
XGI Z9s Display Chipset / Video Memory: 64MB (max up to 64MB) / CRT: Up to 1600x1200 @
32bits.
RS-232 port: COM1: RS-232, COM2: RS-232/422/485 (internal) / LPT port x1 (Internal) /
USB2.0 port x4 (4x internal).
Enhanced IDE interface x1 (Ultra DMA 100/66/33) (Default: Secondary IDE*) / Supports Ultra
DMA 33/66/100 for 40pins connector.
SD socket x1 (Default: Primary IDE/Master).
1 x 10/100 LAN (Built-in R6040) With RJ-45 (90 degree) connector build-in LED.
1x 3.5” Floppy driver connector (internal pin header connector).
1x PC/104 slot.
512KB (ISA interface).
GPIO: 16 bits. Use GPIO_P0 & GPIO_P1 with interrupt support (input / output). Group to 2x
pin header connectors (GPIO1, GPIO2).
RTC / Watchdog: Software programmable from 1~256 seconds.