ADLINK CT-61 - Manual (Page 40)

30 Getting Started
5.2 PMC/XMC Module Installation
The CT-61 provides one PMC and one PMC/XMC slot. The
PMC/XMC slots support 3.3V V(I/O) and 5V VPWR only. For
optional 5V V(I/O) and 12V VPWR support, please contact
ADLINK.
Installing a PMC/XMC Module
1. Align the male connectors of the PMC/XMC card (com-
ponent-side down) to the female connectors of the
CT-61 and press down.
2. Secure the PMC/XMC card to the CT-61 by attaching the
screws provided with the card from the bottom side of
the board.