ADLINK NuPRO-E340 - Manual (Page 45)

Driver Installation 31
NuPRO-E340
4 Driver Installation
This chapter provides information on how to install the
NuPRO-E340 device drivers under Windows XP. The device
drivers are located in the following ADLINK All-in-One DVD
directories:
Install the Windows operating system before installing any driver.
Most standard I/O device drivers are installed during Windows
installation.
r
4.1 Intel® Rapid Storage Technology Driver
1. Create a floppy image as described in the F6Readme.txt file
contained in X:\NuPRO\NuPRO-E340\Others\
F6_SATA_Floppy_Install_Image_WinXP32_WinVISTA32_
IRST 9.5.0.1037.zip.
2. During Windows installation, press F6 when you see the
message “Press F6 if you need to install a third party
SCSI or RAID driver.” Then press S to Specify Additional
Device.
Chipset \NuPRO\NuPRO-E340\Chipset\
Display \NuPRO\NuPRO-E340\VGA\
Ethernet \NuPRO\NuPRO-E340\Ethernet\
TPM \NuPRO\NuPRO-E340\TPM\
.Net Framework \NuPRO\NuPRO-E340\VGA\
Rapid Storage \NuPRO\NuPRO-E340\Others\
USB 3.0 \NuPRO\NuPRO-E340\Others\
Audio \Audio Daughter Board\DB-Audio2\
NOTE: NOTE:
The USB 3.0 ports cannot be used to install Windows as the nec-
essary drivers are currently not included with the OS. Linux kernels
2.6.31 and higher can be installed using the USB 3.0 ports.
NOTE: NOTE:
In order to enable RAID or AHCI mode, you must pre-install the
Intel® Rapid Storage Technology driver during the Windows*
installation process. using the F6 installation method.
*Not required for Windows Vista and Windows 7.