ADLINK NuPRO-E340 - Manual (Page 48)

34 Driver Installation
All-in-One DVD, and extract the file setup.exe from the
following archive: TPM_HostSW_3.7_IFX_RTM.zip.
2. Run the program setup.exe and follow the onscreen
instructions. Restart the system if prompted.
4.8 USB 3.0 Driver
Follow these instructions to install the TPM driver.
1. Locate the directory
X:\NuPRO\NuPRO-E340\Others\ on the ADLINK
All-in-One DVD, and extract the file setup.exe from the
following archive: USB3.0.zip.
2. Run the program setup.exe and follow the onscreen
instructions. Restart the system if prompted.
4.9 Audio Driver
Follow these instructions to install the audio driver for the optional
DB-Audio2 daughter board.
1. Place the ADLINK All-in-One DVD to the optical drive.
2. Locate the audio driver from the directory
X:\Audio Daughter Board\DB-Audio2\, then dou-
ble-click on the setup.exe file to start installation.
3. Follow the screen instructions to complete installation,
then restart the system if prompted.
NOTE: NOTE:
Before installing the audio driver, check the BIOS settings to
make sure that audio is enabled: Chipset > PCH Configura-
tion > HDA Controller (see “PCH Bridge Configuration” on
page 63).