ADLINK CSA-5200 - Manual (Page 48)

48
CSA-5200
7.5.3 SATA Configuration
You can use this screen to select options for the SATA Configuration Settings. An example of
the SATA Configuration screen is shown below.
SATA Controller(s)
Enables or disables SATA device.
SATA Mode Selection
The SATA can be configured as a legacy IDE, AHCI and RAID mode.
When system is in RAID mode and the user needs to setup BIOS, do NOT
push the NumLock button, otherwise, it is possible to make the BIOS hang. If
the BIOS hangs, reset system.
SATA Port 0-4
Displays SATA device name string.
Port 0-4
Enable or disable the SATA Port.
Hot Plug
Appears when SATA mode is set to AHCI. SATA Ports Hot Plug support. Set this
value to Enabled/Disabled.