Connecting peripherals, Figure 3, Flat view of ruffsystem i/o panel – ADLINK RuffSystem 800 User Manual
Page 12
RuffSystem Setup
8
User’s Guide
RuffSystem
Figure 3. Flat View of RuffSystem I/O Panel
Connecting Peripherals
7) Connect the cables and
their respective peripheral
cables/devices.
•
Refer to
for locations and descriptions of the connectors and
controls before making connections or powering on the RuffSystem.
•
Connect the keyboard to the appropriate connector on the RuffSystem
I/O panel (USB or PS/2).
•
Connect the mouse to the appropriate connector on the RuffSystem
I/O panel (USB or PS/2).
•
Connect the CRT or LCD monitor through its 15-pin cable to the VGA
Monitor connector on the I/O panel.
PARALLEL
SERIAL 2
SERIAL 1
SERIAL 4
SERIAL 3
ETHERNET1 ETHERNET 2
USB 4
USB 2
USB 1
USB 3
VGA
KYBD/MS
RESET
DC IN
AUDIO
LIN
MIC
Monitor
Reset Button
Serial Ports (1-4)
DC
Power
In
Ethernet 1 (left) and Ethernet 2 (right)
Microphone In
Mouse/Keyboard
(PS/2)
USB Ports (1-4)
Parallel Port
Power LED
Stereo Audio Out
Stereo Audio In
Power Switch