ADLINK IMX-3000 - Manual (Page 4)

IMX-3000
4
Notices
Product Notes
For user safety, please read and follow all instructions, WARNINGS, CAUTIONS, and
NOTES marked in this manual and on the associated equipment before handling/operating
the equipment. To avoid damaging the product due to improper operation, please read the
manual thoroughly before use.
• IMX-3000 working temperature:
à For 1D and 2D models, the operating temperature range is -10°C to
50°C.
à For the CCD model, the operating temperature range is -10°C to 40°C.
• For all models, the storage temperature range is -20°C to 60°C.
• For all models, the charging temperature range is 0°C to 40°C.
• The use of any batteries or accessories not originally sold or
manufactured by ADLINK may cause damage to the product.
• The charging cradle only supports charging of two batteries
simultaneously. Attempting to charge three or more batteries at the same
time may damage the cradle or result in other safety risks.
• Only connect one device to the DC adapter when charging the batteries
as this may damage the cradle or result in other safety risks.
• Do not power on the IMX-3000 if it is forbidden to use wireless equipment
or if using such equipment will cause noise, interference or other dangers.
• Wireless devices may suffer decreased performance due to
electromagnetic interference.
• Power off the IMX-3000 when refueling. Do not use the IMX-3000 in gas
stations or when near flammables.
• Power off the IMX-3000 in or nearby areas where blasting occurs and
abide by related safety rules. Do not use the IMX-3000 in places with
blasting operation.
• Only authorized maintenance staff can repair the IMX-3000.
• Before trying to connect the IMX-3000 to other devices, read the user
manual for proper instructions. Do not connect the IMX-3000 to any
incompatible products.
• Do not stare into the scanner beam to avoid injury to your eyes.