ADLINK IMX-3000 User Manual
Page 7
IMX-3000
7
Laser Compliance
This device is classified as a Class 2 Laser Product and complies with:
•
21CFR1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50,
dated July 26, 2001.
•
EN60825-1:1994+ A1:2002 +A2:2001
•
IEC60825-1:1993+A1:1997+A2:2001
CAUTION: CLASS 2 LASER RADIATION DO NOT STARE INTO THE BEAM
Output Radiation < 1mW. Emitted wavelength 650 - 670 nm
WARNING! Use of controls or adjustments or performance of procedures other than those
specified herein or in the laser product's installation guide may result in hazardous radiation
exposure. To reduce the risk of exposure to hazardous radiation:
•
Do not try to open the module enclosure. There are no user-serviceable components
inside.
•
Do not operate controls, make adjustments, or perform procedures to the laser device
other than those specified herein.
•
Allow only ADLINK service technicians to repair the unit.