ADLINK Food-D19 IP69k - Manual (Page 22)

Document:
Manual_Giant_Food_Series.docx Page 22 of 47 pages Last change date: 25-Oct-11
•
Parallel Port Configuration
•
Parallel Port
•
Disabled Default Disable the parallel port
•
Enabled
Enable the parallel port
•
Change setting
Use the Change Settings option to change the parallel port IO address and interrupt address.
The assortment of settings differs according to the Serial Ports. Possible settings will not be listed
below. The default setting is [Auto].
•
Auto Default The serial port IO address and interrupt
address are automatically detected.
•
Device Mode
Use the Change Settings option to change the Device Mode of the parallel Port. Default mode is
[Printer Mode]
•
Printer Mode Default