Altech UEC Integrated 32'' LED/LCD HD TV - Manual (Page 54)

CONF ICTS
This is a single tuner decoder which means it can decode only one channel at a time;
you have to watch the same channel as is recording or alternatively you can record
a channel and view a recorded file from the hard drive.
If you try to record 2 programs that overlap on different channels, a message will inform you that
there is a conflict.
TI S IFT PAUS IV TV
P
If you press pause while watching live TV, the program will pause until a later time when you can
resume viewing.
To resume viewing, press the play/pause button again.
As soon as the decoder is paused, a timeshift buffer is created.
The timeshift buffer contains a list of programs
that have occurred since pausing the decoder.
The timeshift buffer is reset when changing
channel or when entering the TV Guide.
The timeshift buffer contents can be displayed
by pressing the green button when the iplate
is visible (if a timeshift buffer is available, a line
will appear above the iplate indicating its
availability). The Event Log, containing the list
of programs, will be shown.
Use the up/down keys to scroll through the
programs in the Event Log.
Press OK on the desired program to start playing
that program from the beginning.
If you press OK to play back a PG-blocked
program, the parental pin (default: 1234) will be
required before the program starts playing.
A green dot indicates the program that is
currently playing.
A red dot indicates the program that is currently
recording (i.e. the program playing on the live
TV broadcast on that channel).
TI S IFT UFF R
For assistance:
[email protected]
www.uec.com.au
Altech UEC, 2014 54