Altech UEC Integrated 32'' LED/LCD HD TV - Manual (Page 6)

Thank you for your purchase of this product. Please read this manual carefully and keep it safe for reference.
Please use the power cord designated for this product. When an extension cord is required, use one with
the correct power rating. The cord must be grounded. The product should be installed on a flat surface to
avoid tipping. Space should be maintained between the back of the product and the wall for proper
ventilation. If you would like to mount the TV to the wall, please see “Preparing the LED TV for Wall
Mounting” below for additional information. Avoid installing the product in the kitchen, bathroom or other
places with high humidity.
Preparing Your LED TV For Wall Mounting
The LED TV can either be kept on the stand or mounted to the wall for viewing. If you choose to mount the
LED TV to the wall, please follow the instructions below.
• Unplug all the cables and cords from your LED TV
• Place the LED TV face down on a soft and flat surface (blanket, foam, cloth, etc.) to prevent any
damage to the display.
• Remove the stand screws to remove the stand
• The mounting bracket is made up of two parts – the wall bracket and the TV bracket. Attach the TV
bracket to the TV via the screws included with your wall mount kit. (Please check the instruction
manual of the wall mount for further information.)
• Attach the wall bracket to the wall with the appropriate screws. Ensure the wall is suitable to hold the
weight of the TV. (Please check the instruction manual of the wall mount for further information.)
• Slide the TV bracket into the wall bracket.
• Ensure the wall mount is secured
Installation
For assistance:
[email protected]
www.uec.com.au
Altech UEC, 2014 6
IMPORTANT: TV should only be wall mounted by a professional installer.