Set up-hdmi – Altech UEC PVR6690 User Manual
Page 12
12
a) Connect the red and white connectors of the RCA lead to the
corresponding colored audio output connectors on the rear of the Set Top
Box.
b) Connect the other end of the cable to the corresponding colored
connectors on your television monitor.
c) Connect the SPDIF/COAXIAL for a better audio quality
1.3. Connect the antenna
Connect the antenna lead to the “ANTENNA IN” connection on the rear of
the Set Top Box.
1.4. Connect the power
a) Plug the connector of the power line of the receiver into the socket.
b) Connect the power to your monitor and turn it on, you are now ready to
get started.
2. SET UP-HDMI
For this Set Up just use a HDMI interface for both the video and audio
connection.
All of video output modes are active simultaneously.
2.1. Prepare your equipment
Make sure that your monitor has HDMI input.
Video and audio signal share one cord