Altech UEC PVR6690 - Manual (Page 16)

16
4.3 Connect the antenna
Connect the antenna lead to the ANTENNA IN connection on the rear of
the Set Top Box.
4.4 Connect the power
a) Plug the connector of the power line of the receiver into the socket.
b) Connect the power to your monitor and turn it on, you are now ready to
get started.
c) Connect the power to your monitor and amplifier and turn them on, you
are now ready to get started.
POWER ON
1. Connect the PVR6690 to your mains power point
2. Connect the power to your monitor and turn it on, you are now ready to
get started.