American Energy Systems BC7000 Auger Housing User Manual
Bc7000 auger housing assemble
Advertising
F:\AESBusinessSystems\AES Technical\Piece part instructions\BC7000 Auger Housing
Assembly.doc
BC7000 Auger Housing Assemble
All BabyC & Winchester Pedestal
• Turn off power on control panel and unplug from the power supply.
• Insert the (4) bolts P1175 from the
front side of the firebox.
• Carefully align the fuel feed system with the
bolts and gasket.
• Start all bolts by hand and tighten to finger
tight.
• Using a 45 deg square line the auger housing
up to the back air shell.
Advertising