Amplicom TCL Vib Travel Alarm Clock - Manual (Page 10)

Service Center
10
The desired setting will flash with [1 Hz], and press UP or DOWN ARROW to set the
conditions of operation. Press and hold UP/DOWN ARROW 2s to fast set these conditions.
Press and hold MODE/ENTER 2s to set the buzzer volume and frequency at buzzer
volume viewing screen.
Press UP or DOWN ARROW to select volume high or low, then press MODE to
confirm volume setting and set buzzer frequency
Press UP or DOWN to select buzzer high/low frequency, then press MODE to
confirm frequency setting and exit buzzer setting mode
Press and hold MODE/ENTER 2s to set the key tone on/off at key tone viewing screen.
Temperature Setting
The indoor temperature will sample every 30 sec.
The temperature range:
Indoor:
-10.0˚C (14.0˚F) → 60.0˚C (110.0˚F),
➢ > 60.0˚C, display “HH.H”;
➢ < –10.0˚C, display “LL.L”.
Settings Settings