Amplicom TCL Vib Travel Alarm Clock - Manual (Page 11)

1-866-AMPLICOM (267-5426) 11
Connect-check with Wrist unit
Transmitter: If alarm 1 or alarm 2 have been set with vibration, then press and hold
DOWN ARROW 2S to send RF connect-check command, (include alarm 1 and alarm 2)
Transmitter: RF command will keep transmitting for 90s, press any key except for
SNOOZE to end connect-check with wrist unit
Transmitter: During connect-check with wrist unit,alarm 1 or alarm 2 icon will flash
Wrist unit: During connect-check with wrist unit, wrist unit also must enter connect-
check mode, this mode can be enter for 10s after power on
Wrist unit: If wrist unit has received connect-check command, it will check channel
number, then vibrate for 1s and flash red LED 4 times, it indicates that wrist unit is
connected with this transmitter;
Settings Settings