Dometic RGE 2000 - Manual (Page 10)

10
Electrical operation
AC 230V~
This option should only be selected where the supply voltage of the connection for
power supply corresponds to the value specified on the data plate. Any difference
in values may result in damage the appliance.
Gas operation
The refrigerator should only be operated using liquid gas
(propane, butane). Do not use town gas or natural gas.
Manual ignition (Piezo-igniter)
1. Open the valve of the gas cylinder
6. Keep rotary switch (B) depressed for another 10-15 seconds, then release.
7. Check the galvanometer to see whether the flame is burning.
8. Repeat the entire process if the flame has been extinguished.
9. Use rotary switch (B) to regulate the temperature in the main refrigerator
compartment.
All gas operated refrigerators are equipped with an automatic flame protec-
tion, which automatically cuts off the supply of gas approximately 30
seconds after the flame has been extinguished.
When using for the first time, and after changing the gas cylinder, the gas
pipes may contain air. By means of brief operation of the refrigerator and
any other gas appliances (e.g. cookers), air is removed from the gas pipes.
The gas will then ignite without delay.
6.1.2
6.1.3
1. Set energy
selector switch
(A) to 230V .
2. Use rotary
switch (B) to
regulate the
temperature in the
main refrige-
rator compartment. A
B
2. Set energy
selector switch (A)
to gas.
3. Press and hold (B)
rotary switch.
5. The needle reaches the green
range if the flame is ignited
4. Activate Piezo
ignition (C)
several times at
intervals 1
second.
A
B
C