Avalue ESM-QM57 - Manual (Page 19)

User ’s Manual
ESM- QM57 User ’s Manual 19

Locate the SODIMM socket on the board.

Hold two edges of the SODIMM module carefully. Keep away from touching its
connectors.

Align the notch key on the module with the rib on the slot.

Firmly press the module into the socket which automatically snaps into the mounting
notch. Do not force the SODIMM module in with extra force as the SODIMM module
only fits in one direction.

To remove the SODIMM modules, push the two ejector tabs on the slot outward
simultaneously, and then pull out the SODIMM module.
Note:
(1) Please do not change any DDR3 SDRAM parameter in BIOS setup to increase
your system’s performance without acquiring technical information in advance.
(2) Static electricity can damage the electronic components of the computer or
optional boards. Before starting these procedures, ensure that you are
discharged of static electricity by touching a grounded metal object briefly.
Mounting Notch Notch Key
Ejector
Tab
204-pin DDR3 SODIMM