Avalue ESM-QM57 - Manual (Page 76)

ESM-QM57
76 ESM- QM57 User ’s Manual
3.6.6.6 Discard Changes
Any changes made to BIOS settings during this session of the BIOS setup program are
discarded. The BIOS setup continues to be active.
3.6.6.7 Restore Defaults
This option restores all BIOS settings to the factory default. This option is useful if the
controller exhibits unpredictable behavior due to an incorrect or inappropriate BIOS setting.
3.6.6.8 Save as user defaults
This option saves a copy of the current BIOS settings as the User Defaults. This option is
useful for preserving custom BIOS setup configurations.
3.6.6.9 Restore as user defaults
This option restores all BIOS settings to the user defaults. This option is useful for restoring
previously preserved custom BIOS setup configurations.
3.6.6.10 Boot override
This option lists all possible bootable devices and allows the user to override the Boot
Option Priorities list for the current boot. If no changes have been made to the BIOS setup
options, the system will continue booting to the selected device without first rebooting. If
BIOS setup options have been changed and saved, a reboot will be required and the boot
override selection will not be valid.
3.6.6.11 Reset system with ME disable mode
This option allows or prevents
firmware local update in the field. When the “Enabled” option
is selected, the IT-admin is able to update the ME locally via the local Management Engine
interface or via the local secure interface.. Once the local update is complete, this setting is
automatically set to “Disabled”. This option must be set to “Enabled” when a local update is
needed.