Avalue ESM-QM77B - Manual (Page 43)

User ’s Manual
ESM-QM77B User ’s Manual 43
Item Options Description
MDES BIOS Status Code
Disabled[Default]
Enabled
Enable/Disable MDES BIOS Status Code.
3.6.2.6 AMT Configuration
Intel AMT allows hardware-based remote management, security, power-management, and
remote-configuration features.
Item Options Description
Intel AMT
Enabled[Default]
Disabled
Enable/Disable Intel ® Active Management
Technology BIOS Extension. Note: iAMT H/W
is always enabled. This option just controls the
BIOS extension execution. If enabled, this
requires additional firmware in the SPI device
BIOS Hotkey Pressed
Enabled
Disabled[Default]
OEMFLag Bit 1: Enable/Disable BIOS hotkey
press.
MEBx Selection Screen
Enabled
Disabled[Default]
OEMFLag Bit 2: Enable/Disable MEBx
selection screen
Hide Un-Configure ME
Confirmation
Enabled
Disabled[Default]
OEMFLag Bit 6: Hide Un-Configure ME
without password Confirmation Prompt.
MEBx Debug Message Output
Enabled
Disabled[Default]
OEMFLag Bit 14: Enable MEBx debug
message output
Un-Configure ME
Enabled
Disabled[Default]
OEMFLag Bit 15: Un-Configure ME without
password
Amt Wait Timer 0
Set timer to wait before sending
ASF_GET_BOOT_OPTIONS.
Disable ME
Enabled
Disabled[Default]
Set ME to Soft Temporary Disabled.
ASF
Enabled[Default]
Disabled
Enable/Disable Alert Specification Format.
Activate Remote Assistance
Process
Enabled
Disabled[Default]
Trigger CIRA boot.