Avalue ESM-QM77B - Manual (Page 57)

User ’s Manual
ESM-QM77B User ’s Manual 57
Item Option Description
Graphics Turbo IMON Current 14 ~31[Default]
Graphics turbo IMON current
values supported (14 -31).
Primary Display
Auto[Default]
IGFX
PEG
PCI
Select which of IGFX/PEG/PCI
Graphics device should be
Primary Display Or select SG for
Switchable Gfx.
Internal Graphics
Auto[Default]
Disabled
Enabled
Keep IGD enabled based on the
setup options.
GTT Size
1MB
2MB[Default]
Select the GTT size
Aperture Size
128MB
256MB [Default]
512MB
Select the Aperture Size
DVMT Pre-Allocated
[32M] [64M] [Default]
[96M] [128M] [160M] [192M]
[224M] [256M] [288M] [320M]
[352M] [384M] [416M] [448M]
[480M] [512M] [1024M]
Select DVMT 5.0 Pre-Allocated
(Fixed) Graphics Memory size
used by the Internal Graphics
Device.
DVMT Total Gfx Mem
[128M]
[256M] [Default]
[MAX]
Select DVMT5.0 Total Graphic
Memory size used by the Internal
Graphics Device.
Gfx Low Power Mode
Disabled
Enabled[Default]
This option is applicable for SFF
only.
Graphics Performance
Analyzers
Disabled[Default]
Enabled
Enable or disable Intel Graphics
Performance Analyzers Counters.
Primary IGFX Boot Display
VBIOS Default
CRT[Default]
LVDS
Port-B (Add2 card)
Port-C HDMI
Port-D DP
Select the Video Device which will
be activated during POST. This
has no effect if external graphics
present. Secondary boot display
selection will appear based on
your selection. VGA modes will be
supported only on primary
display.
Secondary IGFX Boot Display
VBIOS Default
CRT
LVDS[Default]
Port-B (Add2 card)
Port-C HDMI
Port-D DP
Select Secondary Display Device.
Add2 Card HDMI/DP select
HDMI[Default]
DP
Select Add2 card display as HDMI
or DP.
LCD Panel Type
VBIOS Default
640x480 18/1
800x600 18/1
1024x768 18/1[Default]
1280x1024 24/2
Select LCD panel used by Internal
Graphics Device by selecting the
appropriate setup item.