Avalue ESM-QM77 - Manual (Page 17)

User ’s Manual
ESM-QM77 User ’s Manual 17

Locate the SODIMM socket on the board.

Carefully hold two edges of the SODIMM module. avoid touching its connectors.

Align the notch key on the module with the rib on the slot.

Firmly press the modules into the socket which automatically snaps into the mounting
notch. Do not force the SODIMM module in with extra force as the SODIMM module
only fits in one direction.

To remove SODIMM modules, simultaneously push the two ejector tabs outward,
then pull out the SODIMM module.
Note:
(1) Please do not change any DDR3 SDRAM parameter in BIOS setup to increase
your system’s performance without acquiring technical information in advance.
(2) Static electricity can damage the electronic components of the computer or
optional boards. Before proceeding, ensure that you are discharged of static
electricity by briefly touching a grounded metal object.
Mounting Notch Notch Key
Ejector
Tab
204-pin DDR3 SODIMM