Avalue ESM-QM77 - Manual (Page 45)

User ’s Manual
ESM-QM77 User ’s Manual 45
values recommended in
BWG ’s Thermal Reporting for
Thermal Management
settings. Set to Disabled for
manual configuration.
Active Trip Point 0 Fan Speed 0-100[Default]
Active Trip Point 0 Fan Speed
in percentage. Value must be
between 0 (Fan off) – 100
(Max fan speed). This is the
speed at which fan will run
when Active Trip Point 0 is
crossed.
Active Trip Point 1
Disabled
15C
23C
31C
39C
47C
55C[Default]
63C
71C
79C
87C
95C
103C
111C
119C
This value controls the
temperature of the ACPI
Active Trip Point 1 – the point
in which the OS will turn the
processor fan on Active Trip
Point 1 Fan Speed.
Active Trip Point 1 Fan Speed
0-100
75[Default]
Active Trip Point 1 Fan Speed
in percentage. Value must be
between 0 (Fan off) – 100
(Max fan speed). This value
must be less than Active Trip
Point 0 Fan speed. This is the
speed at which.
Passive TC1 Value
1-16
1[Default]
This value sets the TC1 value
for the ACPI Passive Cooling
Formula. Range 1-16.
Passive TC2 Value
1-16
5[Default]
This value sets the TC2 value
for the ACPI Passive Cooling
Formula. Range 1-16.
Passive TSP Value
2-32
10[Default]
This item sets the TSP value
for the ACPI Passive Cooling
Formula. It represents in
tenths of a second how often
the OS will read the
temperature when passive
cooling is enabled. Range
2-32.
PCH Thermal Device
Disabled[Default]
Enabled
Enable or disable PCH
Thermal Device (D31:F6).
PCH Temp Read Disabled PCH Temperature Read