Directed Electronics Automate 552 - Manual (Page 11)

© 1999 Directed Electronics, Inc. Vista, CA 11
wiring the control unit
The wiring harness supplied with this unit is the standard 12-pin harness used by DEI® security systems. Three
wires in the plug are not used. The upgrade from this unit to a security system would simply require unplugging
and exchanging control units and connecting the necessary wires to the vehicle. The functions of all the wires
that are used in the primary harness are displayed in the following wiring diagram and their connections are
described in the wire connection guides.
primary harness (H1) wiring diagram
______
______
______
______
______
______
______
______
______
______
______
remote start ribbon harness wiring diagram
______
______
______
______
______
PURPLE (-) 200 M A STARTER RELAY TURN-ON
ORANGE (-) 200 M A ACCESSORY RELAY TURN-ON
PINK (-) 200
M
A IGNITION RELAY TURN-ON
YELLOW (+) IGNITION INPUT TO REMOTE START
RED (+) CONSTANT POWER 1
2
3
4
5
RED/WHITE (-)200 M A CHANNEL 2 PROGRAMMABLE OUTPUT
RED (+) CONSTANT POWER INPUT
BROWN (-) HORN H0NK OUTPUT
NO WIRE
BLACK (-) CHASSIS GROUND INPUT
VIOLET NO FUNCTION
BLUE NO FUNCTION
GREEN NO FUNCTION
BLACK/WHITE (-)200 M A DOMELIGHT SUPERVISION OUTPUT
WHITE/BLUE (-) ACTIVATION INPUT
WHITE (+)/(-) SELECTABLE LIGHT FLASH OUTPUT
ORANGE (-) 500 M A ARMED OUTPUT H1/1
H1/2
H1/3
H1/4
H1/5
H1/6
H1/7
H1/8
H1/9
H1/10
H1/11
H1/12