Cino L780BT HC - Manual (Page 8)

7
Use FuzzyScan in SPP Mode
Establish SPP Master Connection
Ensure the battery is fully charged. Please go to the folder “Hardware”
located in Bluetooth Advanced Setting of the remote host device to check
its device MAC address. Then prepare a 12-character Code 128 barcode
of the remote host device MAC address, or follow the step 4 to input MAC
address by scanning 12 option codes.
Ensure a virtual COM port is available in your remote host for connecting
the scanner. If not, please go to the folder “Local Services” located in
Bluetooth Advanced Setting. Click the “Add Serial Services” to add one
more Bluetooth COM port.
Power on the scanner within radio coverage and ensure the status
indicator of scanner gives alternative red and green blinks (in
“Uninstall” state). If the scanner is not in uninstall state, please scan the
“Uninstall” command first, then scan the “SPP Master Mode” command.
The status indicator of scanner will turn steady red immediately.
Uninstall
SPP Master Mode
Scan a 12-character MAC address barcode. The scanner will emit
continuous short clicks and the link indicator of the scanner will flash blue
quickly during the radio connecting process. If the Passkey (PIN) is
requested, please enter “00000000” (default setting).
The scanner will emit 4 beeps in ascending tone to indicate the radio is
connected. At the same time, the link indicator of scanner will give 1 blue
blink per 2.5 seconds to indicate the scanner is in radio-connected state.
Please note that if the scanner failed to connect to the host device within
30 seconds, the link indicator will give 3 blue blinks per 2 seconds. But
the scanner is still continuing to discover the host device for another 30
seconds before go to sleep. In the interim, you still can scan “Uninstall”
command to resume the scanner to uninstall state. If the scanner went to
sleep already, you can just press the trigger to wake up the scanner to
continue the installation.
The above procedures are based on popular Windows environment.
But the installation procedure may vary depending on different remote
host devices, operating systems and the Bluetooth drivers. Please
consult your professional IT consultant to obtain necessary support if
any problem has been encountered during the installation processes.
For more detailed information, please visit CINO website.