Cino PL680BT HC User Manual
Page 3
1
There is one HID radio link modes available for Cino FuzzyScan Bluetooth scanner to pair with iOS device – “HID mode” and
“HID Mode with Passkey”. “HID Mode with Passkey”, it is required to enter 4-digit passkey prompted on your iOS device. For
more details, please refer to the “Pocket Scanner QSG”.
This document describes how to pair CINO FuzzyScan Bluetooth Scanner with iOS device through HID connectivity.
Screenshots in this document are all for reference only. The actual screens during the pairing procedure will be varied
depending on the iOS device you use.
Applicable Models:
Bluetooth Image Scanners
z F680BT and F780BT series with firmware version 3.01.04 or above
z PF680BT series with firmware 1.01.01 or above
z F790BT series with firmware 2.05.02 or above
z A770BT series with firmware 1.01.01 or above
Bluetooth Laser Image Scanners
z L680BT series with firmware version 3.01.04 or above
z L780BT series with firmware version 3.01.04 or above
z PL680BT series with firmware version 1.01.01 or above
If your Bluetooth cordless scanner is not with firmware version listed above, please upgrade the firmware.
Preparation
1. iOS device
iOS
device
with
iOS v4.0 or above.
2. FuzzyScan Bluetooth Cordless Scanner with battery fully charged.