Cino PL680BT HC - Manual (Page 8)

6
1. iOS device only allows one HID input device to work at any one time. So, as soon as the scanner is connected
with the Apple iOS device, its virtual keypad will disabled by default. As result, virtual keypad and the paired
scanner can not function simultaneously.
2. To re-enable virtual keypad:
a. For both guy type and pocket-sized scanner:
Please scan following "Sleep" command. The virtual keypad of iOS will show up. If you would like to input the
data by scanning the barcode again, please press the scanner’s trigger once.
b. For pocket-sized scanner:
You also can press the function key1 twice to enable the virtual keypad of iOS directly.
Sleep