Cino PL680BT HC - Manual (Page 10)

8
10.
Tap on “Select Bluetooth mode” and
“Client (Bluetooth Slave)”.
11.
Tap on "Start Discovery" to find paired
scanner ( shown as ”xxxxBT-xxxx”. Tap it
and tap “ok”. (Skip this step for Server
mode)
12.
Back to the main menu.Tap "Datasink
(Output) ” and choose “Keyboard”
13.
Tap “Enable Keyboard” and select
“GetBlue Demo Keyboard”. Go back to
the main menu.
14.
Tap “Start”. Now your FuzzyScan scanner
is successfully connected to GetBlue. The
Log column under the main menu shows
“Data source opened”. blinks blue per
2.5 seconds
4 beeps in
ascending tone
15.
Scan a barcode and the data will display on
the “Data” column. To finish the scanning,
please tap “Stop”.
16.
To send the scanned data to other format:
Tap any column under Data column and a
gray square shows. Please choose “send
to” and then the text editor App you use. All
the scanned data will be converted into the
text format.
Uninstall SPP Slave Mode