Cino PL680BT HC User Manual
Page 3
1
There are four radio link modes available for you to pair Cino FuzzyScan Bluetooth Scanner with Android device, they are
“HID Mode”, “HID Legacy Mode”, “HID Mode with Passkey” and “SPP Slave Mode”. For “HID Legacy Mode”, you can pair
Android device simply and easily without entering the passkey. While “HID Mode with Passkey”, it is required to enter 4-digit
passkey prompted on your Android device. For more details, please refer to the “Pocket Scanner QSG”.
This document describes how to pair Cino FuzzyScan Bluetooth Scanner series with most Android devices. Screenshots in
this document are all for reference only. The actual screens during the pairing procedure will be varied depending on the
Android device you use.
Applicable Models:
Bluetooth Image Scanners
z
F680BT and F780BT series with firmware version 3.01.04 or above
z
PF680BT series with firmware 1.01.01 or above
z
F790BT series with firmware 2.05.02 or above
z
A770BT series with firmware 1.01.01 or above
Bluetooth Laser Image Scanners
z
L680BT series with firmware version 3.01.04 or above
z
L780BT series with firmware version 3.01.04 or above
z
PL680BT series with firmware version 1.01.01 or above
If your Bluetooth cordless scanner is not with firmware version listed above, please upgrade the firmware.
Preparation
1. Android device
Android device with Android 3.0 or above (Android 4.0 or above recommended). (For HID Legacy Mode and HID Mode
with PassKey).
2. FuzzyScan Bluetooth Cordless Scanner with battery fully charged.