Cino L780WD - Manual (Page 10)

Global Control Options: You can check the box to choose the scanners which you desire to perform global remote
control..
LOG: You can choose desired scanner’s logs to be shown on Service Logs by selecting the check box, then
choose “Select” shown on the upper right corner of the service logs. If you would like to see all scanners’ logs, you
don’t have to check the box, but make sure the “All” shown on the upper right corner of the service logs is selected.
Link Status: A read flag icon will be displayed to indicate the scanner is connected to the host machine.
Scanner Lock Status: A lock icon will be displayed to indicate the scanner is remote locked.
COM Port Status: A red triangular pyramid icon will be displayed to indicate the COM port is closed. A green
triangular pyramid icon will be displayed to indicate the COM port is open.
COM Port Binding Status: The different COM port might be assigned to the scanner when you rebuild the
connection to the host machine. If you would like to bind the scanner to the same COM port, you can select the
check box.
COM Port: This is the COM port assigned to the scanner.
HID Conversion: All incoming data will be converted as HID keyboard inputs if you enable this feature by selecting
the check box.
7