Cino L780WD - Manual (Page 8)

Once you completed the 1 st Wi-Fi profile setting, the scanner will try to connect the remote host automatically. If
you set several Wi-Fi profiles, please enter “ONLINE” from the main menu of Desktop, the scanner will try to
connect the default profile. You will see the “Connecting to ……” screen, the scanner will give continuous short
clicks and the link indicator of scanner will flash blue quickly during connecting process.
If your Wi-Fi setting is correct and there is no mistake during link process, the link process will be completed and
you will hear 4 beeps in ascending tone. You will see the link indicator of scanner giving 1 blue blink per 2.5
seconds to indicate the scanner is in radio-connected state.
Once the scanner is connected to remote machine, your will see the device name and IP address of scanner
shown on the console of WaveCentre. A red flag icon will be displayed to indicate the scanner is connected to
the host machine.
5