29 technical information, 29 cause and solution of problems, Cause and solution of problems – Clay Paky A.LEDA WASH K20 User Manual

Page 29: Technical information

Advertising
background image

29

A.LEDA WASH

CAUSE AND SOLUTION OF PROBLEMS

THE PROJECTOR WILL NOT SWITCH ON

PROBLEMS

ELECTRONICS NON-OPERATIONAL

DEFECTIVE PROJECTION

REDUCED LUMINOSITY

POSSIBLE CAUSES

CHECKS AND REMEDIES

No mains supply.

LED exhausted or defective.

Signal transmission cable faulty or disconnected.

Incorrect addressing.

Fault in the electronic circuits.

Lenses or reflector broken

Dust or grease deposited.

Check the power supply voltage.

Call an authorised technician.

Replace the cables.

Check addresses (see instructions).

Call an authorised technician.

Call an authorised technician.

Clean (see instructions).

358

(14.09")

253

(9.96")

423

(16.65")

250

(9.84")

360

(14.17")

381

(15.00")

155

(6.10")

220

(8.66")

320

(12.60")

253

(9.96")

374

(14.72")

245

(9.65")

155

(6.10")

584

(22.99")

160

(6.30")

380

(14.96")

395

(15.55")

330

(12.99")

476

(18.74")

360

(14.17")

460

(18.11")

479

(18.86")

160

(6.30")

290

(11.42")

TECHNICAL INFORMATION

Power supplies available
100-240V 50/60Hz

Input power
• K20 - 750VA
• K10 - 450VA
• K5 - 170VA
Max 1800VA (with 11 A.leda Wash K5 connected in parallel)

Total output
K5 - Max 2100 lumens
K10 - Max 5500 lumens
K20 - Max 10500 lumens

LED source
Osram Ostar RGBW - 15W - LED
Average LED life: 50.000 h

Motors
5 (k10 & k20), 2 (k5) stepper motors, operating with
microsteps, totally microprocessor controlled.

Cooling
• High efficiency die-cast aluminium
• Forced ventilation

Inputs
• DMX 512
• Ethernet

Working position
Working in any position.

Moving Head
• Movement by means of two stepper motors, controlled by

microprocessor.

• Automatic repositioning of PAN and TILT after accidental

movement not controlled by control unit.

• Angle:

- PAN = 540°
- TILT = 270°

IP20 protection rating
• Protected against the entry of solid bodies larger than 12mm

(0.47”).

• No protection against the entry of liquids.

CE Marking
Complies with the following European Directives
- 2006/95/EC (LVD)
- 2004/108/EC (EMC)
- 2011/65/EU (RoHS).

Weights
• K5: 7.5 Kg (16.5 lbs)
• K10: 14 Kg (30.8 lbs)
• K20: 19.5 Kg (43 lbs)

Advertising
This manual is related to the following products: