Clay Paky ALPHA WASH 1500 - Manual (Page 18)

18 ALPHA WASH 1500
LAMP DMX
Used for enabling lamp remote control channel.
1) Press
F - the current settings appear on the display (On or Off).
2) Use the UP B and DOWN C keys to enable (On) or disable (Off)
the lamp remote control channel.
3) Press F to confirm the selection or LEFT D to keep current settings.
PAN / TILT
Invert pan
Used for reversing Pan movement.
1) Press
F - the current settings appear on the display (On or Off).
2) Use the UP B and DOWN C keys to enable (On) or disable (Off)
PAN inversion.
3) Press F to confirm the selection or LEFT D to keep current settings.
Invert tilt
Used for reversing tilt movement.
1) Press
F - the current settings appear on the display (On or Off).
2) Use the UP B and DOWN C keys to enable (On) or disable (Off)
Tilt inversion.
3) Press F to confirm the selection or LEFT D to keep current settings.
Swap Pan-Tilt
Used for swapping Pan and Tilt channels (as well as Pan fine and Tilt fine).
1) Press
F - the current settings appear on the display (On or Off).
2) Use the UP B and DOWN C keys to enable (On) or disable (Off)
Pan and Tilt channel swap.
3) Press F to confirm the selection or LEFT D tto keep current settings.
Encoder Pan-Tilt
Used for enabling the Pan / Tilt encoders.
1) Press
F - the current settings appear on the display (On or Off).
2) Use the UP B and DOWN C keys to enable (On) or disable (Off)
Pan / Tilt encoders.
3) Press F to confirm the selection or LEFT D to keep current settings.
You can quickly disable the Pan and Tilt Encoder by simultaneou-
sly pressing the UP
B and DOWN C keys in the ''Main Menu''.
P/T Homing Mode
Lets you set the initial projector Reset mode.
1) Press
F , the current setting appears on the display.
2) Use the UP B and DOWN C keys to select one of the following
settings:
Standard: Pan & Tilt are simultaneously reset.
Sequenced: Tilt is reset first followed by Pan.
3) Press F to confirm the selection or LEFT D to keep the current
setting.
Pan Home Def Pos
Lets you assign the Pan channel “home” position at the end of Reset,
without a DMX input signal.
1) Press
F , the current setting appears on the display.
2) Use the UP B and DOWN C keys to select one of the following
settings:
0 degree
90 degrees
180 degrees
270 degrees (default)
3) Press F to confirm the selection or LEFT D to keep the current
setting.
Swap
Pan-Tilt
On
Off
Encoder
Pan-Tilt
On
Off
OPTIONS MENU
Lamp Dmx
Pan / Tilt
Option
On
Off
Invert
Pan
On
Off
Invert
Tilt
On
Off
P/T Homing
Mode
Standard
Sequenced
Pan Home
Def Pos