Clay Paky ALPHA WASH HALO 1200 - Manual (Page 27)

27 ALPHA WASH HALO 1200
Continua / Continue
➔
• STOPPER / STROBE - channel 4
BIT % EFFECT
0 - 3 0.0 - 1.2 CLOSED
4 1.7 SLOW STROBE (1 flash/sec)
MA
CR
O
103 40.5 FAST STROBE (12 flash/sec)
104 - 107 41.0 - 42.0 OPEN
108 42.5 SLOW PULSATION
207 81.2 FAST PULSATION
213 - 225 83.7 - 88.2 RANDOM SLOW STROBE
226 - 238 88.7 - 93.2 RANDOM MEDIUM STROBE
239 - 251 93.7 - 98.2 RANDOM FAST STROBE
252 - 255 98.7 - 100 OPEN
208 - 212 81.7 - 83.2 OPEN
BIT % EFFECT
255 100 COLOUR EXCLUDED
0 0.0 COLOUR INSERTED
CHANNEL 1
CYAN
CHANNEL 2
MAGENTA
CHANNEL 3
YELLOW
BIT % EFFECT
255 100 COLOUR INSERTED
0 0.0 COLOUR EXCLUDED
CHANNEL 1
CYAN
CHANNEL 2
MAGENTA
CHANNEL 3
YELLOW
• COLOUR MIXING - channel 1 - 2 - 3
Operation with option CMY Off
Operation with option CMY On
• DIMMER LAMP - channel 5
BIT % EFFECT
255 100 LAMP ON
0 0.0 LAMP OFF
• FROST - channel 6
BIT % EFFECT
255 100 FROST INSERTED
0 0.0 FROST EXCLUDED
• ZOOM - channel 8
BIT % EFFECT
255 100 WIDE BEAM
0 0.0 NARROW BEAM
• OVALIZER - channel 7
BIT % EFFECT
255 100 OVAL INSERTED
0 0.0 OVAL EXCLUDED
• PAN - channel 9
Operation with option Pan
Off
(Tilt conventionally represented at 15% and option Tilt Off)
BIT %
255 100
0 0.0
IMPORTANT: The lamp dim to half power 3 seconds after
the channels 1-2-3 stay at 0% level. The lamp goes back
to full power when the channel level is put higher than 0%.
IMPORTANT: The lamp dim to half power 3 seconds after
the channels 1-2-3 stay at 100% level. The lamp goes back
to full power when the channel level is put lower than 100%.
IMPORTANT: The lamp dim to half power 3 seconds after
the channel stay at 0% level. The lamp goes back to full
power when the channel level is put higher than 0%.