Clay Paky ASTRORAGGI POWER - Manual (Page 3)

7
TROUBLESHOOTING 5
No electrical power supply. Check that power is available at
the mains socket and/or that fuses
are intact.
Lamp expended or faulty. Change lamp
(see instructions).
Signal transmission cable short-
circuiting or disconnected. Change cables.
Address codes incorrect. See projector coding instructions.
Dust or grease deposit. Clean
(see instructions).
Defect in electronic circuits. Contact an authorized technician.
PROJECTOR DOES NOT LIGHT UP
ELECTRONICS NOT WORKING FAULTS
REDUCED BRIGHTNESS
POSSIBLE CAUSES CHECKS AND REMEDIES
•
•
•
•
•
•
•
TECHNICAL DATA 6
CONSTRUCTION
FEATURES
Safety devices
Power shuts off automatically in the event
of overheating or cooling system failure.
Cooling
Forced ventilation cooling system using
axial flow fans.
Housing
• Extruded diecast aluminium.
• Epoxy powder coated finish
Operating position
Will function in any position.
Weights and dimensions
Weight: 23 kg (50 lbs 10 ozs).
ELECTRICAL / MECHANICAL
SPECIFICATIONS
Power supplies available
• 220 - 240V 50Hz
• 200 - 220V 60Hz
• 200V 50Hz
• 200V 60Hz
• 260V 50Hz
The projector is designed to operate at
the mains frequency and voltage given
on the electrical data label on the base
of the appliance.
Lamp
Metal halide with special built-in power
supply.
• Type HSR 400W (MSR 400W)
- Cap GX 9.5
- Colour temperature 5600 K
- Luminous flux 33000 lm
- Average life 650 h
Power consumption
1600VA at 220V 50Hz
Motors
N. 3 step-by-step motors, operating in
microsteps and totally controlled by a
microprocessor.
CONTROL SYSTEMS
Channels
N. 2 control channels.
Inputs
ASTRORAGGI POWER is designed to
accept analog or digital control signals
from controllers or computers.
• RS232/423(PMX) or DMX 512 digital
serial input
• 0 -10V analog input
WIRING DIAGRAM 7
360
(14.2”)
360
(14.2”)
510
(20.1”)
ø 450
(17.7”)
ENGLISH
The products referred to in this manual comply with EC
Directives on:
• Low Voltage 73/23
• Electromagnetic Compatibility 89/336
The specifications published in this manual are not binding, and may be revised or updated
at any time by Clay Paky without notice in the interests of improving product quality.