Clay Paky IGLOO ECO - C61196 - Manual (Page 14)

14 IGLOO
OK
NO
9
Installing Igloo - Fig. 9
WARNING: with the exception of when the Igloo is positioned on the floor, the safety cable must be fitted. (Cod.
105041/003 available on request). This must be securely fixed to the support structure of the equipment and then
connected to the fixing point at the centre of the base.
If the device is fixed to a wall, horizontally, mount the kit C61193 for proper and complete installation Fig.10.
CAUTION:
The 2 IGLOO conveyors should always be facing
down. By gripping them with both hands it is
possible to rotate them in the desired position.
An acoustic signal will alert incorrect conveyor
positions.