Clay Paky MYTHOS - Manual (Page 20)

20 MYTHOS
MACRO EFFECTS
It allows you to select one of the 2 following options:
Macro Group size: Lets you select the number of projectors (minimum 2 and maximum 15) to be included in the “Macro
Effects” channel operation.
Macro fixture ID: It lets you attribute an ID address to the projector for the phase displacement for the scene’s starting
time in Macro Effects channel.
• Fixed to 1-15: (to assign to all the projectors to be included in the Macro Effects operation).
•
Auto by DMX Address: According to the DMX address, it automatically detects the starting sequence of the scene
in the Macro mode (to assign to all the projectors to be included in the Macro Effects channel operation).
SILENT MODE
Allows you to set the preferred mode of the 2 available:
Standard
Maximum speed and thus maximum noise effects.
Quiet
It handles the speed of some effects (Pan, Tilt, Focus), reducing the noise level.
DISPLAY
It lets you activate (ON) display brightness reduction after about 30 seconds in idle status. Select OFF to turn off or
disable this option.
SAFETY BEAM
It lets you turn ON a light beam temperature reduction when Focus movement is 50% over its stroke, if no CMY colour
wheels are inserted, Soft Filter is automatically inserted on the Cyan wheel.
SETTINGS
Used to save 3 different settings of the items in the option menu and relevant submenus.
•
Default preset (*)
• User preset 1
•
User preset 2
•
User Preset 3
- Load preset 'X’ is used to recall a previously stored configuration.
- Save to preset ‘X’ is used to save the current configuration.
(*) DEFAULT PRESET
It lets you restore default values on all option menu items and relevant submenus.
Press the left and right arrows/keys simultaneously in the "main menu” to quickly restore default values
(DEFAULT PRESET).