Clay Paky V.I.P. 250 ALO / ST - Manual (Page 4)

8
TECHNICAL DATA 6
Power supply
• 24V 50/60Hz
Input power
• 260VA
Lamp
• Halogen 24V 250W
- Connection G6.35
- Colour temperature 3,450 K
- Luminous flux 9,000 lm
- Average life 300 h
Optical unit
• Base in die-cast aluminium.
• Twin lens condenser.
• Spherical reflector with a high
luminous efficiency.
Lens units
• Standard: 1:2,4/100 mm (30,9°)
• Optional: 1:2,8/45 mm multi-lens (64,2°)
• Optional: 1:2,8/60 mm multi-lens (45,8°)
• Optional: 1:2,8/85 mm multi-lens (34,4°)
• Optional: 1:2,8/120 mm multi-lens (24,1°)
• Optional: 1:3,5/150 mm multi-lens (19,5°)
• Optional: 1:4/165 mm (17,2°)
• Optional: 1:4,4/200 mm (14,3°)
• Optional: 1:3,5/70÷120 mm zoom
(39,5°÷22,9°)
Safety Devices
• Short-circuiting protection on the
accessory holder guides.
Cooling
Forced ventilation with an axial fan.
Body
• In die-cast and extruded aluminium.
• Epoxy powder painting.
Mounting
• Bracket in steel painted with epoxy
powders.
• Three installation positions with a step
of 25 mm (0.98”).
• Bracket adjustable on 120°.
Working position
Operation in any position.
Dimensions and weights
Weight: 2,2 kg (4 Ibs 13 ozs).
(14.13”)
359
(8.07”)
205
(8.86”) 225
(10.83”) 275
(5.12”)
130
(7.28”)
185 (6.69”)
170
TROUBLESHOOTING 5
No mains supply. Check there is power at the
supply socket.
THE PROJECTOR WILL NOT SWITCH ON
NO MOTOR-DRIVEN ACCESSORY WORKS
TROUBLE
DEFECTIVE PROJECTION
REDUCED BRIGHTNESS
POSSIBLE CAUSES CHECKS AND REMEDIES
•
•
•
•
•
• •
• Lamp exhausted or defective. Replace the lamp.
(See instructions).
No power on the guides. Call an authorized technician.
The accessory motors fail to
work. Call an authorized technician.
Lenses or reflector broken. Call an authorized technician.
Dust or grease deposited. Clean. (See instructions).