Clearaudio INNOVATION + STROBOSCOPE TESTRECORD - Manual (Page 10)

Innovation /
Innovation Wood
User manual
Page 9  Clearaudio electronic GmbH 2015
8.)
Now you can remove the mounting clip with the delivered hex key wrench.
9.)
Now take the Delrin - platter with both hands out of the box and set the platter carefully
onto the bearing.
The flat side of the platter should face to the stainless steel platter and the side with the cut-
out (for the record) should face up.
To avoid any damages on your bearing, the Delrin-platter should have room temperature
before the set up begin (approx. 20 ° Celsius).
Avoid major side forces to avoid any
damages to the ceramic bearing!
You will find suitable adjustment equipment under www.clearaudio.de or
www.analogshop.de
10.)
To install the tonearm, please follow the user manual of the manufacturer.
11.)
To mount and adjust a cartridge, please follow the user manual of the manufacturer.
Pic. 8: Removing of the mounting clip
Pic. 9: Set up Delrin platter and bearing cap