Delta RMC101 - Manual (Page 375)

Ethernet 5.2
Communications 5-125
Modbus
Address
Register Description
2305 Event Step for Axis 0 on Input 0 Rising Edge
2306 Event Step for Axis 1 on Input 0 Rising Edge
2307 Event Step for Axis 2 on Input 0 Rising Edge
2308 Event Step for Axis 3 on Input 0 Rising Edge
2309 Event Step for Axis 4 on Input 0 Rising Edge
2310 Event Step for Axis 5 on Input 0 Rising Edge
2311 Event Step for Axis 6 on Input 0 Rising Edge
2312 Event Step for Axis 7 on Input 0 Rising Edge
2313 + n Event Step for Axes n (0-7) on Input 1 Rising
Edge
: :
2425 + n Event Step for Axes n (0-7) on Input 15
Rising Edge
2433 + n Event Step for Axes n (0-7) on Input 0 Falling
Edge
: :
2553 + n Event Step for Axes n (0-7) on Input 15
Falling Edge
Status Map Registers:
This block of registers is only used by the Modbus Plus and PROFIBUS interfaces. Therefore,
these registers are unused by this Ethernet protocol.
Modbus
Address
Register Description
2561-
2592
Status Map Entries
Plot Type Registers:
The plot type registers can be read or written. The values that are read indicate the extra plot
information in the current graph. The values written to these registers tell the controller which
extra plot information to obtain on the next plot. For these registers, the following values are used:
• 0: Extra position precision
• 1: Command and Command Value