Ditch Witch 8500 - Manual (Page 35)

System Operation - 34
8500 Tracking System Operator’s Manual
Beacon Tracking Overview
CMW
Beacon Tracking Overview
The tracker has two modes: walkover location and drill-thru. Use walkover location mode to find position of
the beacon. Once tracker is in or near the beacon plane, select the depth view to determine the depth and
the left/right offset. With tracker in front of and parallel to beacon, press the L/R button while in the main
locate view to see the projected path of the beacon. In drill-thru mode, the tracker is placed along the
intended bore path and provides the necessary steering corrections for the drilling unit operator to drill that
path.
Potential radio frequency (RF) hazard. Operating this device within 4”
(100 mm) of your body may cause RF exposure levels to exceed FCC RF exposure limits
and should be avoided.
NOTICE:
• This device must not be co-located with any other radio transmitter.
• The maximum antenna gain is 2.5 dBi.